View Single Post
  #1 (permalink)  
Old October 26, 2010, 06:16 PM
chrisk's Avatar
chrisk chrisk is offline
Folding Captain
 
Join Date: Jul 2008
Location: GTA, Ontario
Posts: 7,410

My System Specs

Default Heads-up for GPU3 users with older GPUs: updated client

An updated client was released for GPU3 users today. Mostly affects G80/2xx series users:

Quote:
New v6 clients (systray/console) are available at http://www.stanford.edu/~friedrim/Foldi ... xe_console and http://www.stanford.edu/~friedrim/Foldi ... xe_systray (Version 6.40r1); you will need to remove '_console' and '_systray' from the file names.

The major change to these clients is that the gpu species is now based on the compute capability of the board. In the earlier v6 client, the species was based on the installed version of the CUDA runtime libraries. The new gpu species values are

Compute capability -> gpu species

1.0 -> 10
1.1 -> 11
1.2 -> 12
1.3 -> 13
2.0 -> 20
2.1 -> 21
unknown -> 0

The motivation for these changes is that NVIDIA GPU3 cores cannot run on boards w/ compute capability 1.0. If a WU is run on these older boards, it will crash.
Folding Forum • View topic - Updated v6 Client

If you have non-fermi based cards, I would still use GPU2 as the PPD is usually higher, but there is supposed to be greater stability.

This update increases the stability of GPU3 for older hardware.

If you use GPU3 and fermi, I would not worry about updating now until v7 of the client...
__________________
Fold for team #54196
Reply With Quote