View Single Post
  #65 (permalink)  
Old March 5, 2008, 02:27 AM
Cptn Vortex's Avatar
Cptn Vortex Cptn Vortex is offline
Hall Of Fame
Join Date: May 2007
Location: Vancouver
Posts: 3,874

I just decided to watercool my other quad machine. Had the parts lying around!

Before..... That stock cooler was good!

Bowing the GT, it was simple. I just put the oring on like this, then put the top on, and gave it some pressure. Then I used a little eyeglass screwdriver and pushed in on the oring from the sides to get it into place. Easy as pie!

A nice Bow


Ou nice fanssss

A tight Fit!

Anyway, my load temps dropped from about 70 to 40....Not bad!!!!!
The Vortex H20

Coolermaster ATCS 840 w Window panel
MSI Z87-G45 Gaming
i5 4690K @ 4.5GHZ
8GB GSkill Ripjaws X 2133MHZ CL10
Asus Xonar Essence STX
OCZ Z-Series GOLD 850W
2 x 240GB Patriot Blaze SSD RAID0 :)
Acheiva Shimian Q270 Lite 2560x1440

Benq W1070 Pojector.

EK Supreme HF, EK FC GTX 680 Block x 2, MCR320+Gelid Silent 12 Push/Pull, DD Pump, EK Multioption 100ml Res, EK Coolstream XT 220 RAD Gelid Wings Push/Pull.
Reply With Quote