View Single Post
  #3 (permalink)  
Old October 20, 2010, 04:31 PM
encorp's Avatar
encorp encorp is offline
Hall Of Fame
Join Date: Apr 2008
Location: Toronto
Posts: 3,422

My System Specs


Could honestly just be the USB header itself or a split in one of the wires etc. Don't rule out something mechanical versus software/driver.

A lot of the time too it could be a firmware issue with the card or even an IRQ issue in your system - which causes your system to juggle the device with another. I know IRQ problems are not as common as they used to be but they can happen, especially with a legacy device.

Try and connect it in all sorts of other USB ports including front panel etc.

But this sounds like an issue between USB 1.0 and 2.0 stuff.
DISCLAIMER: The views and opinions expressed in the immediately preceding post are those of encorp and do not reflect the views and/or opinions of family, friends, or anyone remotely associated with encorp unless explicitly stated. encorp does not make any warranty, express or implied, or assumes any liability or responsibility for the quality, factuality or use of information in the immediately preceding post.
Reply With Quote