View Single Post
  #8 (permalink)  
Old September 15, 2010, 01:44 PM
sswilson's Avatar
sswilson sswilson is online now
Join Date: Dec 2006
Location: Moncton NB
Posts: 17,193

My System Specs


Are you using 1 set of fans or two for push/pull?

Either way, you'll use the mounting holes on the rad. If there are fans on the side of the rad you're mounting, you'll need long screws with the head on the outside case then threaded though the fan and then into the rad, if there are no fans, you'll need short ones with the head outside of the case, mounting directly to the rad on the other side.

edit: Measure your screws carefully to ensure that they won't travel too far beyond the rad mounting holes and into the rad fins.
ASUS ROG Strix Z370-G Gaming (WiFi AC) / i7 8700K / 2X 8G XPG Spectrix D40 (3000) / XFX XTR 750 / ASUS Strix GTX 1070ti
AZZA Titan 240 / Custom WC / Intel 730 Series 480GB SSD / Seagate Barracuda 1TB / ASUS SWIFT PG279Q

Asrock AM1H-ITX / AM1 Athlon 5350 / 1X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / Uncased 256GB Sandisk Z400S SSD / Mini-Box M350 / 24" Westinghouse L2410NM
Reply With Quote