Quote:
Originally Posted by tanshen  Thanks for the quick replies guys. I have my ram running at 5-5-5-15 at 430 fsb. I loosened it upto 5-7-7-22 and didnt see any difference so went back to 5-5-5-15. I will try with 2 sticks and see if it makes any difference.
I always have 1:1 ratio. My system won't post anything else.
I dropped my multi to 8 and 7 but fsb wall seems the same. My north bridge is also water cooled.
I haven't tried upping the pcie frq. yet, will do that once i get my ocz 700W (had antec tp3 650 which blew due to water leakage from my gpu water block, arghhhh..). I will post results once I get the psu up and installed. |
That's good, but the southbridge on the DS3L's get very hot.. so don't neglect cooling that, if possible. the fact that you can't get a higher FSB with the lower multi makes me question the RAM. I would still try taking out 2 DIMM's, and running Memtest 86+... as Biff said, your RAM is likely holding you back.