View Single Post
  #16 (permalink)  
Old September 13, 2010, 09:52 AM
Zero82z Zero82z is offline
Join Date: Sep 2009
Location: Montreal, QC
Posts: 5,415

My System Specs


To jump the PSU, disconnect it completely from the PC and turn off the power switch on the back. Connect the green wire from the 24-pin ATX connector to one of the black wires with a piece of wire or a metal paper clip. Then turn the switch on.

If the PSU is in standby mode, that doesn't reflect whether or not it is capable of functioning in normal mode. Standby power is basically provided by a separate PSU within the unit.
Reply With Quote