View Single Post
  #42 (permalink)  
Old February 24, 2008, 01:25 PM
zlojack's Avatar
zlojack zlojack is offline
Hall Of Fame
Join Date: Nov 2007
Location: Toronto
Posts: 2,056

My System Specs


Ok... the loops are:

1) CPU>NB (still thinking about mosfets, even though it's not totally necessary)
2) 2 3870 X2's

I got a drivebay reservoir for the CPU loop. The pump fits perfectly in the bottom right corner mounted on the Mobo tray with the rad mounted in the front drivebays.

The second rad will go on the back with a radbox and the pump mounted on the floor of the case with the Micro res mounted on the crossbeam. I did a lot of measuring and checking and I'm confident this will fit nicely.

I just put the first coat of primer on today (it was warm, +1 Celsius today!)

Hopefully It'll be nice and dry tomorrow so I can sand and put on the second coat. I need to take advantage of the next couple of days because on Wed the high will be -10

Here are some pics with the primer done. Notice the huge amount of snow on my back deck

Reply With Quote