View Single Post
  #3 (permalink)  
Old February 20, 2008, 07:41 PM
NoL NoL is offline
Join Date: Feb 2008
Location: NJ, USA
Posts: 48

Okay, pelts movement ability needs to exceed heat output of proc greatly first off. No small TEC's will work, will be counter productive. You must have a cold plate, and a pressure clamp as well, tec's want about 400 PSI to maximize efficiency. Then that goes on CPU, properly setup and tuned in (not just run at max volts like many do) you can easily have subzero efficiency.
Reply With Quote