Thread: fan wiriring
View Single Post
  #4 (permalink)  
Old August 15, 2010, 06:22 PM
gomer gomer is offline
Top Prospect
 
Join Date: Mar 2010
Posts: 75
Default

Technical Data:
500 rpm: 0.015 A - 5 dBA - 31 m/h
800 rpm: 0.023 A - 9 dBA - 48 m/h
1,150 rpm: 0.034 A - 16 dBA - 63 m/h
1,450 rpm: 0.049 A - 21 dBA - 85 m/h
1,850 rpm: 0.083 A - 28 dBA - 98 m/h

thats the specs on the fans, i bought the 18050 rpm ones but ill only be running then around 1150 or less. just checked out ncix and the highest controller amp rating per channel i could find was 1a wich should work if i divide the 8x fans on the 480 rad into 2 channels the only worry is the "starting amperage" listed on the fan wich is .36 of an amp x4 = about 1.5 amp draw but thats at 1850 rpm soo if i keep them turned low i should be alright? and does anyone know if these channels are fused at all or will they burst into flames if i crank up my speeds?

thanks for the help guys
Reply With Quote