View Single Post
  #3 (permalink)  
Old August 1, 2010, 07:09 AM
stoanee's Avatar
stoanee stoanee is offline
Hall Of Fame
F@H
 
Join Date: Jun 2007
Location: Lacombe Alberta
Posts: 3,228

My System Specs

Default

Welcome to the fun of watercooling! As you have figured out, the manufacturers supplied routing etc. may not be the best way to do things. The shortest tubing run with the least amount of bends is optimal and you will have to decide how you want to do it. This may take several tries, do not be afraid of moving your tubing around until you get your best fit. As gingerbee stated the G 1/4 fittings do not like to be overtightened or side loaded, they may leak if they are. It sounds to me that the clamps should just fit. If not, you will have to reorder and save the old ones for your next project. Good luck!
__________________
heatware
Reply With Quote