View Single Post
  #5 (permalink)  
Old July 4, 2010, 11:04 PM
windwithme windwithme is offline
Allstar
 
Join Date: Jul 2009
Posts: 519
Default

Temperature
System standby - 48~53


CPU full speed - 70~76
Intel Burn Test v2.4,Stress Level Maximum


The room temperature is around 25 degree C, and I think itís acceptable.
If Core i7 enable HT, you need higher voltage and the power and temperature will be higher.

VGA is GIGABYTE GTX260 OC SLI 3WAY plus PhysX
For PSU, I recommend to use big watt product. The CPU and GPU power consumption is extreme huge.
I use Antec TPQ-1200 which pass 80Plus silver


TPQ-1200 packing and body are black and red. Itís racing car style.


3DMark Vantage => P28391
CPU SCORE => 52156
GPU SCORE => 24647


StreetFighter IV Benchmark
1920 X 1200 => 206.39FPS


Biohazard5 Benchmark
1280 X 800 => 147.4 fps


DEVIL MAY CRY4
1280 X 1024 => 278.86/230.45/326.68/190.17 fps


The Last Remnant
1280 X 720 => 189.31 fps


In this high spec PC, in common 3D benchmark software, you can see the result as below.
If the resolution is 1920 X 1200 above and enable all effects, the page will be as low as 50~100FPS.
The pity is GTX260 only can support 3WAY SLI. The 4th GTX260 use for PhysX, so it doesnít help much for 3D performance.

DRAM DDR3 2000 CL8 8-8-24 1T
Sandra Memory Bandwidth - 32800 MB/s
EVEREST Memory Read - 21000 MB/s


LAG1366 platform strength is 3-channel DDR3. It enhances DRAM performance a lot.
Even LGA 1156 also cannot reach it as P55 only support dual channel DDR3.
Reply With Quote