View Single Post
June 18, 2010, 07:32 AM
Join Date: Mar 2009
As promised, I've been slow on the updates... been kept really busy by Nils :( Sleeving a PSU is such a PITA. I only have a few left cables left, will probably be ~ 12hours of work just for the sleeving by the time it's all said and done. I will be using a single 24-pin, and bridging it to turn both PSUs on at once - will post tutorial on it later.
For anyone considering sleeving, there really is no competition for MPDC (
) - the quality is top notch and it was at my front door, from Germany, 5 days after I ordered it. Nils is the man.
My biggest worry now is the fans and rheostats. This will take some testing, planning and custom wiring. You can see the "bird's nest" I'll have to deal with in the next pic. 4 pumps, 20 fans and 5 rheostats :( I will also post a tutorial on the rheostat setup. Custom wiring seems to be an area of concern for a lot of builders, so I'll document the shit out of mine so you can learn from all my mistakes
WORK KANG: Silverstone SG03 | EVGA x58 Micro w/ 920 @ 4.2Ghz | Sapphire 5970 | 12GB Dominator DDR3-2000 | 240GB Revodrive X2 | SilverStone ST650F
MINI KANG: BitFenix Prodigy | Asus P8Z77i Deluxe mITX w/ 2600K @ 4.5Ghz | EVGA GTX 680 2GB | 8GB Vengeance DDR3-1866 | 2x Intel 160GB SSD | Corsair AX650
Custom MM Ascension | SR-2 | 2x X5650 | 2x SilverStone ST1000F | 2x Intel 160GB SSD | 15x 120mm rads | Under construction...
My System Specs
View Public Profile
Send a private message to Liu Kang
Find all posts by Liu Kang