Thread: IDE to AHCI
View Single Post
  #1 (permalink)  
Old February 5, 2008, 05:00 PM
sircuster sircuster is offline
Join Date: Jun 2007
Posts: 22
Default IDE to AHCI

My MB BIOS is set to IDE for both Controllers. I would like to switch the drives to AHCI.

Will doing this corrupt the data on the drives?

With the drives set to AHCI, will I be able to plug them into my son's computer Sata 1 port, which is set to IDE. This would be my external eSata drive that is used for file storage only.

Your expertise is much apprechiated with this problem.
Reply With Quote