View Single Post
  #4 (permalink)  
Old January 29, 2008, 01:21 PM
mattydies's Avatar
mattydies mattydies is offline
Top Prospect
 
Join Date: Mar 2007
Location: Ottawa, Ontario
Posts: 217

My System Specs

Default

I updated to the 803 Bios a few days before reading Shampoo's reply.

The bios update seemed to proceed in proper fashion.

BUT!!!!!!!!! Now My computer turns on, shows the CPU Spec and freezes.

If I reset perhaps a dozen times (rough guess) I can actually get into my bios. I have tried making changes but to no avail.

I reset the bios on the mobo (pop the battery and change the jumper, yes I put the battery back in and the jumper back to the right spot) and the bios settings were reset, but no change.

So when in BIOS I tried downgrading to 3 or 4 other BIOS versions for my board, A message comes up saying that these bios files are not suitable for downgrading.

I have a MUCH better track record with re-flashing XBOX Bios (original xbox, on the mobo - NO mod chip) and downgrading PSP's THAN COMPUTERS!!!


Any thoughts????




Matty
__________________
Intel E8400 @ 4.TWENTY Ghz & counting
Ultra 120 Ext. w/ Dual Noctua NF-P12's
Gigabyte EP45-UD3P (Rev. 1.6)
Patriot Viper (2X2GB) 1066-5-5-5-15
Gigabyte 6870 Windforce (FINALLY)
Samsung SyncMaster 225BW (22" Widescreen - 5MS)
Western Digital 74GB Raptor X 2 (Raid 0)
Seagate 750GB - SATA 2 - 7200.10
Nspire X-extreme (CWT) 750W PSU
Audigy 4 Pro, Yamaha HTR, Cerwin Vega Speakers (5.1)
Antec 900 Case
SCYTHE Fan Controller w/ 4 extra Noctua NFP-12's
Reply With Quote