View Single Post
  #1 (permalink)  
Old January 18, 2008, 08:09 PM
Shredder Shredder is offline
Join Date: Mar 2007
Location: Alberta
Posts: 263

My System Specs

Default Ram Water Cooling loop

I was curious how about finding fittings that would allow 1/2 " ID to be broke out to 4 x 1/4 " for the OCZ ram Coolers and rejoined back to 1/2 " on other end of ram, just to keep volume of fluid close to main loop volume.(Parallel Cooling)

As it is, I would be required to choke down the 1/2 " to 1/4 " then daisy chain the ram in series with the 1/4 " tubing, returning to 1/2 " after the ram.(Series Cooling)

Any thoughts or sources on or for this type of fitting ?
Reply With Quote