Quote:
Originally Posted by bushwickbill  To run at 3.2Ghz I had to put V.core to 1.425 in Bios, CPU-z showed 1.328 when Orthos was running(Massive V-Droop?). So Being As CPU-Z is reporting such a V-Droop, I am not really putting 1.425 Volts into it right? |
NEVER, EVER (!) trust CPU-Z for voltage readings! CPU-Z is known to 'misread' the Vcore. Use Everest or something similar. Now this doesn't mean that 1.4250V is bad for you CPU.
As a matter of fact....these Conroes like a little more juice....as long as the cooling is appropriate!
As for your RAM...your timings are pretty tight already, however you could leave them at 4-4-4-10 and see if you can squeeze some more MHz out of them, to make it run a little faster!
Good Luck