View Single Post
  #4 (permalink)  
Old December 14, 2007, 07:30 AM
werty316's Avatar
werty316 werty316 is offline
MVP
F@H
 
Join Date: Apr 2007
Posts: 428
Default

Quote:
Originally Posted by NuxTux View Post
I also ran this and got no error, lucky me :) What I would like to know is if its a good idea to run the test when the ram is overclocked to test for stability?
Yes, if your memory clock is just even a bit unstable, you'll get errors.

Quote:
Originally Posted by NuxTux View Post
How much passes should I say "this ram is good" ?
More passes the better but three runs is adequate.

Quote:
Originally Posted by NuxTux View Post
In another note my RAM is no longer being picked up as dual channel when using the slot that are listed on my motherboard manual.
Any suggestions?
I don't know what motherboard you have but if a DIMM combination of 1&3/2&4 or 1&2/3&4 doesn't enable dual channel then there is something wrong.
__________________
If you can see Chuck Norris, he can see you. If you can't see Chuck Norris you may be only seconds away from death.
Reply With Quote