View Single Post
  #2 (permalink)  
Old December 2, 2009, 11:39 AM
TopDogZero's Avatar
TopDogZero TopDogZero is offline
Allstar
 
Join Date: May 2008
Location: Ajax, Ontario
Posts: 558

My System Specs

Default

If all the RAM is DDR 800 then it should run at that speed don't matter how much you have, are you sure that the new sticks are 800 (you can use CPU-Z to see what the SPD on the RAM is). If all the ram is DDR-800 try setting the speed in the BIOS yourself but check and see if the voltage for all the sticks are the same 1.8v is the normal spec but high performance ram usually uses more.
Reply With Quote