View Single Post
  #17 (permalink)  
Old November 15, 2009, 04:59 PM
somecanadianguy's Avatar
somecanadianguy somecanadianguy is offline
Hall Of Fame
F@H
 
Join Date: Mar 2009
Location: somecanadiancity
Posts: 1,118

My System Specs

Default

What OS are you running?
If it's 64bit make sure it's set accordingly in BIOS (your board should have that setting).
I've heard a couple people say that caused problems with linX.

Can you run Prime 95 Blend test OC'd with no problems?
Have you tried to run linX @ stock settings?
Maybe reset CMOS and then load optimized defaults.
Then see if linX gives the same errors @ stock..
Then try your OC again, but don't load it from a saved profile... input all settings manually again.

As for clock skew...
I don't really have any suggestions.
I've not had to mess with it yet.
Check out this link for a bit of info.
I've had trouble finding good info on clock skew and i7.

How to: Clock Skew Can Save Your Overclock And Memory - Overclock.net - Overclocking.net

Last edited by somecanadianguy; November 15, 2009 at 06:08 PM.
Reply With Quote