View Single Post
  #8 (permalink)  
Old December 1, 2007, 11:13 PM
zlojack's Avatar
zlojack zlojack is offline
Hall Of Fame
F@H
 
Join Date: Nov 2007
Location: Toronto
Posts: 2,057

My System Specs

Default

Quote:
Originally Posted by 3.0charlie View Post
idle and stock? that's way too high. you have to find a way to install coretemp and make sure the hsf has good contact with the cpu.
Ok... I took off the heat sink and cleaned off the paste and looked at it with a razor blade and it was definitely not flat.

I lapped the base and now I'm getting 37 C, so that should hopefully come down a bit once the Arctic Silver breaks in.. also I think I might have used too much AS last time, so I used MUCH less this time around...(I actually did a test run to see how it would spread and it was much thinner with the new amount I used)

I still find the mounting to be loose in terms of being able to rotate, but it doesn't seem to have any play in terms of separating from the CPU....

I'll give it some time and see how it goes.
Reply With Quote