View Single Post
  #14 (permalink)  
Old November 14, 2007, 12:58 PM
Lithotech's Avatar
Lithotech Lithotech is offline
MVP
Level up: 61% Level up: 61% Level up: 61%
Level: 11 - 133 points to level up
 
Join Date: Apr 2007
Location: North Vancouver Rain Belt
Posts: 348
Default

Those temps are just fine for a stock cooler -- one of the bigger chips would idle at those temps.

Interesting to note that 2.7ghz was all I could get out of my e2160 with stock volts.

Quote:
Originally Posted by Mr. Cipher View Post
I keep on reading that the max voltage is 1.35v, however on Intel's CPU Spec Finder, the max listed is 1.5v. Any know the cause of the discrepancy?
Not sure about the spec sheet, looking it up now...

Core Temp will give you the cpu's rated maximum voltage, this shows up in the VID field.

Core Temp E2160 stock 1.8ghz 1.3volts under full load with Folding at Home:
(Reads 1.297v in CPU-Z, and 1.17v at idle with C1E and Speedstep etc)



Core Temp E2160 2.7ghz 1.3volts idle:
(Reads 1.297v in CPU-Z)




.
__________________
eVGA 680i SLI (A1) P31
Intel E6750 Conroe 1333 G0 SLA9V L723B134 | Scythe Ninja-B | Antec Tri-Cool 80cfm
2x1024MB Crucial Ballistix Tracer 8500 | 5-5-5-15 1066mhz @1.9v
boot: 4x WD Caviar SE16 250gb SATA2 Raid-0
backup: Seagate 500gb 32mb SATA2
eye: eVGA 9800GTX+ SC 512mb 770/2.25ghz
candy: Samsung 940B-HAS | X-Fi XMusic | Pioneer DVR-212D SATA
juice: PC Power & Cooling 750Quad | Cooler Master HAF932
steering: Logitech G15 & G5 | E3D Pro/Momo Wheel | X-530's

Last edited by Lithotech; November 14, 2007 at 01:04 PM.
Reply With Quote