View Single Post
  #11 (permalink)  
Old September 24, 2009, 06:16 PM
upcoast604 upcoast604 is offline
Join Date: Oct 2008
Location: Sunshine coast, BC
Posts: 775

Basics, match up dbls for tweeter, mid, woofer and crossover ( shoot for 96 or above). Watts fills the room with dbl (noise), bigger the room u need more watts. Woofer comes in paper, poly and carbon fiber carbon the better( pay attention to magnet weight more is better). Woofers also are bass reflex(hole in cabnet) or acoustic(no hole) each manufacture has it's own dimensions of cabnet of what it has to be. Mids come in a sealed housing or not ( use the sealed). Tweeters, don't get those plastic horn crap ones. long and short building will cost more than $200 for anything half good, your best bet is to go down to the local pawn shop and buy a set for $50.

To the one that has a dead tweeter if u can't get the exact match u need to replace both.
Gaming FX 8350 4.4GHZ / Tuniq Tower 120/ MSI GTX 1070 Armor / G Skill 32GB / S12D 850w/ GA 990FXA-UD3 /SSD 240GB , WD1TB FALS, 3TB Toshiba / Dell IPS 1920x1080/ Win 10 64
Daily Use x4 965BE 3.4GHZ/GA 970 Gaming/ Rx 580 8GB /EA750w/4x4GB ram/Win 10 64 and 24TB of hdds
Reply With Quote