View Single Post
  #1 (permalink)  
Old October 21, 2007, 02:20 AM
Cptn Vortex's Avatar
Cptn Vortex Cptn Vortex is offline
Hall Of Fame
F@H
 
Join Date: May 2007
Location: Vancouver
Posts: 3,726
Default G0 vs B3 X3210 results

So, I had a B3 X3210 I had used for a bit, and was perfectly happy with. However, it would get quite warm, up near 70, which got me nervous. So I got my hands on a G0. Here we go. All I have is my desktop print-screens, which should work. For some reason Coretemp is being dumb and not launching on my screen, so it only appears in my task manager.

For testing purposes, I have the B3 at 2.8GHZ, 1.275V in Bios, 7x multi. Cooling is handled by my Swiftech Apex Ultra Plus, full system watercooling setup, with the chipset and 8800GTX in the loop.

The G0 is at 3.2GHZ, 1.25v in the Bios, with a 8x multi. So far 7 hours stable, and I have yet to test on lower voltage. I literally just poped the CPU in! Temps are great!! Under 50 degrees full load, with a 8800GTX and the chipset in the same loop! I'm definitely happy.
Attached Images
   
__________________
The Vortex H20

Coolermaster ATCS 840 w Window panel
MSI Z77A-GD65
Intel i7 3770K @ 4.6GHZ 1.28v
Galaxy GTX 680 @ 1241MHZ
8GB Mushkin Blackline 1600MHZ 9-9-9-24 1.5v
Asus Xonar Essence STX
OCZ Z-Series GOLD 850W
2 x 128GB Corsair Force GT SATA3 SSD RAID0 :)
Acheiva Shimian Q270 Lite 2560x1440

Benq W500 Pojector.

Watercooling:
EK Supreme HF, EK FC GTX 680 Block, MCR320+Gelid Silent 12 Push/Pull, DD Pump, EK Multioption 100ml Res, EK Coolstream XT 220 RAD Gelid Wings Push/Pull.
Reply With Quote