View Single Post
  #1 (permalink)  
Old July 28, 2009, 10:37 AM
phantom_jo phantom_jo is offline
Top Prospect
 
Join Date: Jan 2009
Location: Surabaya, East Java
Posts: 50

My System Specs

Unhappy dead motherboard?

a couple of days ago i tried to overclock an old phenom 9600 on a MSI DKA790GX, first it was 2.6Ghz then 2.7Ghz and i keep going on while also increasing the voltages of the components. During one of my prime95 test runs the computer suddenly shuts down. At first i thought it might be windows crashing, but the computer won't turn on no matter what. I started separating the components one by one starting from the power supply. Every components works perfectly in another system that i tested it in. I tried pulling the battery out to test, but still no go. I tried running with minimum components, and that's a no go either. What do you guys think? The LED on the motherboard is on but the cpu fan spins only once and it's dead again.

To recap, things I've done:
1) isolated the component
2) reset the bios
3) run minimum config

Cheers.

Last edited by phantom_jo; July 28, 2009 at 10:43 AM.
Reply With Quote