View Single Post
  #7 (permalink)  
Old July 24, 2009, 11:52 AM
Flasker's Avatar
Flasker Flasker is offline
Rookie
 
Join Date: Aug 2008
Posts: 25
Default

Set Performance enhance to standard
Set your QPI/VTT voltage to 1.325V - 1.375V
Most mobos need memory voltage set to 1.7V with 12Gb. With 6 DIMMs the vDroop to the ram is approximately 0.05V, so to get 1.65V to the ram you need to set 1.7V in the BIOS.
You should just have to set the primary timings, 7-7-7-24 (CAS, TRCD, TRP, TRAS) the board should do the rest
__________________
Mushkin Enhanced comes alive
Reply With Quote