View Single Post
  #9 (permalink)  
Old July 12, 2009, 06:53 AM
Varroa's Avatar
Varroa Varroa is offline
Allstar
 
Join Date: Nov 2007
Location: National Capital Region, Canada
Posts: 793

My System Specs

Default Koolance blocks

I have the Koolance vid-487 block using the same pads that were on my old 4870. These are my idle temps and my room temp is 26c right now. Load temps are around 10c higher across the board. This is cooled by a swiftech 2.120 rad using two Noctua fans at 1/2 speed. My P35 Northbridge is also on the same loop but that is all. Noticed that my VDDCs get to 110c during fur mark so I reseated my block and now they only hit about 100c in furmark. There is something wrong but I can't figure it out.

Name:  temps.jpg
Views: 1951
Size:  47.5 KB
__________________
GAMER: Win10 Pro x64, I7 8086K (corsair H110i), Asrock Z370 Taichi, EVGA GTX 1080 FTW, Gskill 4 x 8 GB DDR4 3200Mhz, Samsung 970 EVO 500GB M.2. NVME SSD, Western Digital Blue 1 TB M..2. SSD. Crucial M4 256GB, Mushkin 480 GB ECO SSD, HX750W, Sound blaster Z, & Phanteks Enthoo Pro M

Lenovo Ideapad Y510p: i7-4700MQ 2.4GHz (undervolted by 80mV), 16GB DDR3L-1866MHz, Intel GMA 4600HD / SLI'ed Nvidia Geforce GT 755M 2GB GDDR5, 240 GB Crucial SSD, 128GB M.2 SSD, 15.6" HD+ Glossy LED

Last edited by Varroa; July 12, 2009 at 08:02 AM.
Reply With Quote