View Single Post
  #2 (permalink)  
Old May 9, 2009, 11:21 AM
Jake_HT's Avatar
Jake_HT Jake_HT is offline
Hall Of Fame
Join Date: May 2008
Location: Calgary, AB
Posts: 1,976

My System Specs


From my case manual (has the Tri-Cools)

"The minimum voltage to start a 120mm TriCool fan is 5V. We recommend that you set the fan speed switch to High if you choose to connect the fan(s) to a fan control device. A fan control device regulates the fan speed by varying the voltage, which may start as low as 4.5V to 5V. Connecting a TriCool fan set on Medium or Low to a fan-control device may result in the fan not being able to start because the already lowered voltage from the fan control device will be further reduced by the TriCool circuitry below 5V."

And the LED's should still work.

Are you runnin' the fans on high prior to using fan controller?
Reply With Quote