View Single Post
  #142 (permalink)  
Old April 12, 2009, 06:19 PM
sswilson's Avatar
sswilson sswilson is online now
Moderator
F@H
 
Join Date: Dec 2006
Location: Moncton NB
Posts: 14,238

My System Specs

Default

Here's what I've come up with WRT my impression of the IC7 peaking at max temp vrs MX2 staying fairly consistent.....



The graph at the top is the IC7 and the one on the bottom is the MX2. Don't get caught up with the actual posted temps, as these are coretemp temps, and I'm not even sure if these MX2 readings are the actual ones from the run that ended up being recorded... I only know from the time frame that they are MX2.

If you look at the temps on the top graph (IC7) you'll see that the lower "load" temp is fairly consistant, while the max "load" temps are temporary spikes rather than the norm.

Looking at the temps in the lower graph (MX2) you'll see that the trend is just the opposite. On this graph the higher "load" temp (max) is fairly consistant, while the temporary spikes tend towards the lower temps.

Based on this, I'm pretty sure that the IC7 "average" temps over the whole 1 hour time frame would be at least 1c better (probably more) than the max/min peak readings would indicate.

Does that make sense folks or am I looking at this the wrong way?
__________________
EVGA X58 3X SLI / i7 980X / 3X 4G Mushkin Blackline Frostbite / XFX Pro 1000W / EVGA GTX 680 SC+ 2GB / Intel DC S3700 200G / WD 6401AALS / TT Lvl 10 GT
Swiftech MCP655 WC Pump / EK XT 240 Rad / 2X Scythe Ultra Kaze / EK Supreme HF / Primochill Myriad Dual Bay Res / Dell UltraSharp U2412M

Gigabyte C1007UN-D / 2X4G Gskill PC3-10700 / Pico PSU / 2.5" 750G Toshiba HDD / Mini-Box M350 / 1X 19" BenQ / 1X 17" HP
Reply With Quote