GOTCHA !!!
Finally found it.
Yesterday i oc'd from 3.4 to 3.5; this upped the current load, specially when doing a 511 WU which draws a lot of current.
My UPS is a Belkin, and the load meter used to indicate around 66-68%, in the green, with the oc at 3.4;
Now, with the oc at 3.5, the total load on the UPS has gone up, and when the amperage on the gpu has a spike (up to 105A.),
the load on the Belkin goes up to around 72%, in the yellow, and it warns me about an "impending overload" by ringing the bell. haha!
Thanks to all who tried to help me. :-)
__________________
Jacques
Ego cogito, ergo deus non est.  |