View Single Post
  #4 (permalink)  
Old February 13, 2007, 12:12 PM
sswilson's Avatar
sswilson sswilson is offline
Join Date: Dec 2006
Location: Moncton NB
Posts: 17,196

My System Specs


I haven't done an applique (sp?) with it, but I do know that most solvent based aerosol products will give you a frosted look on plexiglass / acrylic.

It would be fairly easy to test what they do if you have a couple of junk pieces of plexi/acrylic kicking around.

Once you decide on a spray solvent, you can mask off the whole window (double check to make sure that the masking tape you use will not be affected by the solvent), apply the image to the mask, and then cut out the parts you want frosted.

Spray the solvent on, and voila!!!!!

I don't have a case window, but I've been dying to try this method......

If you do try it out, please be sure to post some pics to let us know how it turns out.
ASUS ROG Strix Z370-G Gaming (WiFi AC) / i7 8700K / 2X 8G XPG Spectrix D40 (3000) / XFX XTR 750 / ASUS Strix GTX 1070ti
AZZA Titan 240 / Custom WC / Intel 730 Series 480GB SSD / Seagate Barracuda 1TB / ASUS SWIFT PG279Q

Asrock AM1H-ITX / AM1 Athlon 5350 / 1X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / Uncased 256GB Sandisk Z400S SSD / Mini-Box M350 / 24" Westinghouse L2410NM
Reply With Quote