View Single Post
  #16 (permalink)  
Old August 9, 2007, 11:09 PM
BALISTX's Avatar
Hall Of Fame
Join Date: Feb 2007
Location: Ottawa, ON
Posts: 2,005


I set the timings to 2.5-3-2-5 1T and dropped the vdimm back to 2.6 stock, got it up to 205 FSB . Tried 206 - booted, ran Super Pi and then when I went to open notepad BSOD and it rebooted.. I then tried upping the vdimm to 2.7v it failed to boot into Windows. Changed the memory timings to 2.5-3-3-5, failed to boot into Windows. Dropped the vdimm back down to 2.6v at memory timings of 2.5-3--3-5
failed to load Windows.

It appears upping the vdimm on any FSB past 2.7v causing the system to crash. I'm gone as high 2.9. I've even tried these vdimm settings on 210 FSB.
"Though I walk through the shadow of the Valley of Death I shall fear no evil as my C8 Carbine is locked and loaded."

Next Build: E5200 @ 3.6GHz (333x11) | Xigmatek HDT-RS1283 HSF | Biostar TP43D2-A7 | Mushkin Redlines DDR2-1000 @ DDR2-999 5-5-5-12
EVGA 9600 GT 512MB - 650MHz - 1800MHz - 1626MHz | Seagate 'Cuda 250GB 7200rpm SATA2 | Corsair VX550 | CM690 - Custom Atomic Orange Pearl


Last edited by BALISTX; August 9, 2007 at 11:11 PM.
Reply With Quote