View Single Post
  #4 (permalink)  
Old March 19, 2009, 10:49 AM
3.0charlie's Avatar
3.0charlie 3.0charlie is offline
3.0 "I kill SR2's" Charlie
F@H
 
Join Date: May 2007
Location: Laval, QC
Posts: 9,679

My System Specs

Default

Quote:
Originally Posted by shayan288 View Post
Thanks for the guide, but I have three questions.
What are tye wraps and how do I use them?(are they like zip ties?).
Where do I fill the fluid where is the opening located?
How do I jump start the PSU from a 24-pin connector (pins 4 and 6 / green % black wires.)? (I have no idea of what that means.)
Thanks.
Shayan.:help:
Oh my. :help: indeed.

Zap straps / zip ties / tye wraps, are all the same.
You fill the loop using the reservoir, or a fill port. If you have neither, then you have a problem.
Jump start the PSU following this guide: Guide: Jump Starting a PSU - Overclock3D Forums. Make sure the pump is connected to a Molex, and I always add a few (2) fans to add some load.
__________________
Hydro-Quebec is salivating...
Reply With Quote