View Single Post
  #3 (permalink)  
Old March 19, 2009, 09:25 AM
shayan288's Avatar
shayan288 shayan288 is offline
Join Date: Oct 2008
Location: Vancouver, BC, Canada
Posts: 910

Originally Posted by 3.0charlie View Post
Drain the fluid.
Cut off the tubing on the old CPU block.
Remove CPU block.
Install barbs on new CPU block.
Install new CPU block.
Install new tubing (or if long enough old tubing).
Add tye-wraps to secure tubing ends to barbs.
Fill fluid.
Jump-start PSU from 24-pin connector (pins 4 and 6 / green & black wires).
24 hours leak check.
Thanks for the guide, but I have three questions.
What are tye wraps and how do I use them?(are they like zip ties?).
Where do I fill the fluid where is the opening located?
How do I jump start the PSU from a 24-pin connector (pins 4 and 6 / green % black wires.)? (I have no idea of what that means.)
The 288

Q9550 E0 stepping @ 4Ghz
Gigabyte EP45 UD3P
G.Skill pc2 8500 1066mhz RAM
Corsair TX750 Watt Power Supply
Western Digital 500gb and Seagate 500gb in RAID 0
Western Digital 250gb
Antec 1200
OCZ Vendetta 2 LGA 775 CPU cooler with bolt thru kit
XFX HD5970
Steelseries 7G Mechanical Keyboard
Samsung 305T 30 Inch 2560x1600 LCD monitor
Altec Lansing 5.1 Surround Speakers, Sennheiser HD215's, G35's
Steelseries Xai Laser Mouse
Windows 7 Ultimate x64
Reply With Quote