 mix up problem with my hard drives they are read the same size
Ok I bought one of those wd caviler black 640 GB drives installed it and went through the acronis thing ( noob here never done it before) my wd is drive G: after two tries I think I finally got it to boot up from the WD drive.
So now I can't tell my drives apart because in my computer they all say the same size. I have 1 sygate sata 320 gb one Seagate 320 gb Nonsata ( i guess its called ATA) and the new drive that I just did all of this to is a wd 640 gb drive . but all of them read as 297gb
edit I just rebooted and my WD drive is the primary main drive which boots first but I still can't tell the difference in the drives
__________________  Work in Progress
Folder : Parts so far ; ASUS KGPE-D16 Dual Socket G34, 8x2GB kingston1333MHz DDR3, 2x 6128 CPUs 2x NH-U9DO A3.inside a old hacked up case no side panels and a laptop harddrive , almost perfect for those cold winter months  BackOrdered Parts needed;
A better case
Last edited by Shadowmeph; March 14, 2009 at 04:12 PM.
|