View Single Post
  #26 (permalink)  
Old August 4, 2007, 08:23 AM
BALISTX's Avatar
Hall Of Fame
Join Date: Feb 2007
Location: Ottawa, ON
Posts: 2,005

I tried the other memory slots and it did the same thing. Right now I have them back in the orange slots.

Everything in the BIOS for the DRAM config is set back to Auto. Should I leave at that or try the stock timings of 2-3-2-5?

If I want to run the FSB @ 250 what should I set my LDT/FSB and my DRAM/FSB Ratios to?

Should I leave all my other settings stock, included voltage - currently @ 1.40v and my PCI-E Freq @ 105MHz?

I'm going to see if I can take some pics of my BIOS screen settings to show what they are currently at.
"Though I walk through the shadow of the Valley of Death I shall fear no evil as my C8 Carbine is locked and loaded."

Next Build: E5200 @ 3.6GHz (333x11) | Xigmatek HDT-RS1283 HSF | Biostar TP43D2-A7 | Mushkin Redlines DDR2-1000 @ DDR2-999 5-5-5-12
EVGA 9600 GT 512MB - 650MHz - 1800MHz - 1626MHz | Seagate 'Cuda 250GB 7200rpm SATA2 | Corsair VX550 | CM690 - Custom Atomic Orange Pearl

Reply With Quote