View Single Post
  #3 (permalink)  
Old February 28, 2009, 11:09 AM
Shadowmeph's Avatar
Shadowmeph Shadowmeph is offline
Hall Of Fame
Join Date: Oct 2007
Posts: 3,810

My System Specs


Originally Posted by MpG View Post
Yes, you're going to have to use a T-fitting. Make sure the center hole on the waterblock is the inlet, and the outside two are the outlet.

You might also want to go down to your local hardware/autoparts store and try to get a couple of thicker o-rings for the fittings going on the radiator, since the Swiftech models have a countersunk groove in them that might keep the standard compression fitting o-rings from sealing properly. Once you get the parts, try them and see - the pressure needs to be on the oring, no the fitting itself.
thats for reply. and thanks for the advice.
great ok now I just have to wait for the parts to arrive ...

Edit I forgot to ask should I lap my CPU since I know that the stinger is totally flat?

Last edited by Shadowmeph; February 28, 2009 at 11:34 AM.
Reply With Quote