View Single Post
  #18 (permalink)  
Old February 22, 2009, 06:16 PM
sswilson's Avatar
sswilson sswilson is offline
Moderator
F@H
 
Join Date: Dec 2006
Location: Moncton NB
Posts: 17,464

My System Specs

Default

Quote:
Originally Posted by 3.0charlie View Post
Flipping it over will work, make sure the cap is tight and sealed. As for your foam issue, I found out from trial-and-error and using so many different pump/res combos that the smaller the res the more foam you get. If the res allows a clean flow to the pump - micro-bubble free, then you should not have any. Do you have clear tubing? Do you see the bubbles at the pump inlet/outlet, or from somewhere else in the loop?

Inlet/outlet made no difference in temps on many of my rigs.
I have a single piece of clear tubing (put it in specifically so that I could see the coolant :) ) that runs from the rad to the inlet of the pump.
__________________
ASUS ROG Strix Z370-G Gaming (WiFi AC) / i7 8700K / 2X 8G XPG Spectrix D40 (3000) / XFX XTR 750 / ASUS Strix GTX 1070ti
AZZA Titan 240 / Custom WC / Intel 730 Series 480GB SSD / Intel 760p 512GB NVMe / Seagate Barracuda 1TB / ASUS SWIFT PG279Q

Asrock AM1H-ITX / AM1 Athlon 5350 / 1X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / Uncased 256GB Sandisk Z400S SSD / Mini-Box M350 / 24" Westinghouse L2410NM
Reply With Quote