View Single Post
  #1 (permalink)  
Old February 13, 2009, 07:56 PM
donimo's Avatar
donimo donimo is offline
Join Date: Oct 2007
Location: Vancouver Island
Posts: 831
Default quick question regarding loop routing

hi all I have a 120 rad and a 240 rad, and am only running a chipset and cpu block for now.

My question is should I route it:

1) 240>cpu>120>chipset


2) 240>chipset>120>cpu



It seems on one hand that option 1 gives the cpu the coldest water cause its fresh from the 240, but then again the chipset doesnt put out much so the fluid in option 2 might actully be cooler than option 1, any thoughts?
Mobo GA-Z77X-UD3 CPU i5-3570K stock RAM:2x4GB Patriot Viper 1866 1.5v GPU:XFX HD6850 BE + Gigabyte HD6850 @820/4400MHz Case:Bitfenix Raider w/2x 200mm + 135mm PSU: Corsair HX620

Last edited by donimo; February 13, 2009 at 08:47 PM.
Reply With Quote