View Single Post
  #4 (permalink)  
Old February 7, 2009, 07:43 AM
sswilson's Avatar
sswilson sswilson is offline
Join Date: Dec 2006
Location: Moncton NB
Posts: 14,973

My System Specs


Originally Posted by 3.0charlie View Post
No difference in performance. But having the barbs on the bottom of the rad makes bleeding a little more difficult. Make sure you move your case in all directions to clear the trapped air.
I was thinking just the opposite.........

If your barbs are up top, you'd have to turn the case upside down to completely drain the coolant out of the rad. If they're on the bottom, the rad will completely drain so long as your drain point is below the rad.
MSI Z87I Gaming AC / i7 4770K / 2X 8G Gskill 1866 Sniper / XFX XTR 750 / EVGA GTX 680 SC+ 2GB / Intel 730 Series 480GB SSD / Seagate Barracuda 1TB
Inwin 904 / Swiftech MCP655-b / Alphacool NexXxos XT45 120 Rad / 2X Scythe GT AP-15 / EK Supreme HF / Dell UltraSharp U2412M

Asrock AM1H-ITX / AM1 Athlon 5350 / 2X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / 250G Samsung 840 Series SSD / Mini-Box M350 / 1X 22" Dell IPS / 1X 22" HP
Reply With Quote