MCR220, MCP655 and a Apogee GTZ all the way..
As magelan said.. the threads are g 1/4, most barbs I've seen are g 1/4 threaded, I think basically all of them are.. As for tubing, the 2 most common choices are 1/2" and 7/16".. People tend to get the 7/16" which with the 1/2" barb is a tight fit, the tubing is going no where, in fact to take it off, you will be lucky to pull it off, you would most probably have to cut the tubing.. 1/2" can give more tighter bends though but since it's thicker tubing, people don't like much tubing in their cases.. I personally would get 1/2" tubing, if you don't wanna hurt yourself taking tubing off, and the ease of installation..
__________________ Intel E8400, Biostar TPower i45 G-Skill PC2-8500 4GB, Saphire HD4870 512mb Cooler Master HAF 932, Enermax Galaxy DXX 1000W Samsung 931BW 19" LCD, Logitech MX Revolution |