View Single Post
  #3 (permalink)  
Old January 6, 2009, 08:42 PM
MpG's Avatar
MpG MpG is offline
Hall Of Fame
Join Date: Aug 2007
Location: Kitchener, ON
Posts: 3,143

The air pressure in the loop doesn't matter. If you still have air bubbles in the loop, you need them to reach the T-line. Make sure the T-line is partly full, then just run the computer until all the air is gone from the main loop. It could take a long time, especially if you have a high flow rate. If you want, you can pinch the tubing near the T-line to slow the water down, and make it easier for the bubbles to go into the T-line.
i7 2600K | ASUS Maximus IV GENE-Z | 580GTX | Corsair DDR3-2133
Reply With Quote