View Single Post
  #1 (permalink)  
Old January 6, 2009, 08:09 PM
ebdoradz's Avatar
ebdoradz ebdoradz is offline
Join Date: Mar 2007
Location: Rouyn-Noranda, QC
Posts: 754
Default Best way to add water to a loop

i've build my loop and now and then i ear some bubbles passing throw the pump... i would need to add a little water ..

my system is PA120.3 + MCP655 + d-tek fuzion v2 on cpu and V2 on gpu + Filport.

try #1
shoudl i had water turn the computer on and then tight the filport screw .. if i do when i turn the computer OFF and untight that screw tou can hear a PSsssfffttt from the over pressure that is in the tubing.

try #2
if i add water then tight the filport and then turn the computer on. after the computer is turn on and i untight the filport i can hear the pppssssfft but from the negative presure inside my loop.

the question is should i run my loop in negative pressure or positive pressure???

and usualy those who are running filport loop what you do ti had water?? #1 or #2??
Gigabyte GA-MA790XT-UD4P / AMD Phenom II x3 720BE @ x4/ Crucial Ballistic DDR3 / Sapphire 4830 512mb / Corsair 620W PSU / 2*80GB Seagate

DFI LP nF4 Ultra-D / AMD Opteron 165 @ 2.7Ghz/ 2*1GB OCZ Gold GX XTC / Sapphire X1950XT / Fortron 450W PSU / 2*Maxtor 80Gb

Reply With Quote