View Single Post
  #1 (permalink)  
Old July 2, 2007, 02:35 PM
Cartman Cartman is offline
Join Date: Jul 2007
Posts: 2
Default Buffalo Firestix problem

I can't get these FSX800D2C-K2G to boot past 375mhz FSB @ 5-5-5 no matter what settings I try. I've upped the ram voltage to as high as 2.4 and the CPU voltage to 1.440 with no success. My monitor just flashes until I power down and reboot to the overclock failed screen. I've tried to set my multiplier to 6X and still can't boot at DDR2 800. I keep my sticks in the black dimms but have also tried the yellow ones to no effect. I can boot up fine @ 375 4-4-4-12 2.1V and the CPU @ 8X 1.3250V without a problem and is stable. Anyone have any thoughts?
Current Build:
Asus P5K 'Vanilla' | Intel C2D E4300 AFP7 HSF | Buffalo Firestix 2X1GB PC2-6400 DDR2-800

ATI Radeon X1800XL |
Creative SB Audigy 2 ZS
Corsair HX520
WD 80G Sata
Samsung 205BW

Reply With Quote