Do you want an actual stand-off mount (like mine which is the first picture in the case thread.... :) ) or would you prefer a top mount directly attached to the top of the case? (Babr did this with a 240 on his antec case).
If you are planning on direct top mount vice a stand off on you just need to cut the top of the case to match the fans you are going to use and then direct the barbs downwards into the case.
If you want to do a stand-off mount like I did, I would suggest making the holes for the hoses larger than the hose and then using some form of grommet so that the hose isn't directly in contact with the metal.
As far as a guide goes..... Babr did a pretty good build log for his direct top mount, and you might be able to dig my build log up over at DIY-Street (same username.... :) ).
__________________ EVGA X58 3X SLI / i7 980X / 3X 4G Mushkin Blackline Frostbite / XFX Pro 1000W / EVGA GTX 680 SC+ 2GB / Corsair F120 / WD 6401AALS / TT Lvl 10 GT Swiftech MCP655 WC Pump / EK XT 240 Rad / 2X Scythe Ultra Kaze / EK Supreme HF / Primochill Myriad Dual Bay Res / Dell UltraSharp U2412M Sabertooth 990FX / PhII X4 965 / 2X4G Corsair XMS3 / EVGA GTX580 + EK Block / Corsair 120G Force GT Corsair TX750 / XSPC EX240 / Swiftech MCP655-B / XSPC Dual Bay Res / ? CPU block / Bitfenix Ghost / Samsung 931BF |