View Single Post
  #1 (permalink)  
Old December 14, 2008, 10:00 PM
BALISTX's Avatar
Hall Of Fame
Join Date: Feb 2007
Location: Ottawa, ON
Posts: 2,005
Default My Next Case Mod

So here is what I have planned for my next case. I will be picking up an Antec 300 for my next build and I plan on doing the following to it.

1. Cut the necessary holes in the mobo tray for proper cable management.
2. Doing a window mod. I will be making the window 11 1/2" x 9 1/2" and using a translucent black or smoked piece of 1/8" or 1/4" acrylic.
3. Sandblasting the case and painting the interior a matte black and the exterior (except for the mesh) a carbon fiber paint scheme.
4. Applying the following graphic to the back panel of the case and then clearing the whole thing.

5. Add rocker switches to the front panels with amber LEDs in them to control the red (orange) Loygis CCFL and UV CCFL
6. Replace the expansion slot covers with the Silverstone vented slot covers
"Though I walk through the shadow of the Valley of Death I shall fear no evil as my C8 Carbine is locked and loaded."

Next Build: E5200 @ 3.6GHz (333x11) | Xigmatek HDT-RS1283 HSF | Biostar TP43D2-A7 | Mushkin Redlines DDR2-1000 @ DDR2-999 5-5-5-12
EVGA 9600 GT 512MB - 650MHz - 1800MHz - 1626MHz | Seagate 'Cuda 250GB 7200rpm SATA2 | Corsair VX550 | CM690 - Custom Atomic Orange Pearl

Reply With Quote