Thread: check my cpuz`s
View Single Post
  #5 (permalink)  
Old December 1, 2008, 06:40 PM
CanadaRox's Avatar
CanadaRox CanadaRox is offline
Allstar
F@H
 
Join Date: Feb 2008
Location: Scarborough (Toronto)
Posts: 614
Default

I would definitely try for more. Intel's spec sheet for E8400 (identical to the E3110 as far as I know) says anything higher than 1.45V will cause damage to the processor. Of course, there are people who say less can do it, and people who've run 1.5V and seem to not have any degradation, so be careful with the voltage. I personally would go to a max of 1.45V, but thats just me. I'd start by tightening the RAM timings to 5-5-5-15 (unless that is the limiting factor in the overclock). Then I would up the voltage a little and see how far the chip can get with 1.4V and safe temperatures.
__________________
Project: Black and White
i7 920 D0 | 3 x 2GB DDR3 | EVGA X58 SLI LE
XFX 4890 | Corsair HX750 | Corsair Obsidian
Reply With Quote