View Single Post
  #29 (permalink)  
Old May 29, 2007, 02:46 AM
Delavan's Avatar
Delavan Delavan is offline
Hall Of Fame
 
Join Date: May 2007
Location: AB
Posts: 1,164
Default

This is my first tentative at OCing my E6420 L644G289...I know the batch has bad reputation.

Well, I tried the "magic thinking" 8X400FSB, RAM 1:1, stock voltage. No Love. No boot. That was expected.

Then a modest 8X333MHZ, RAM 1:1, stock volts,works good no problem.

In the posts above ,you OC gods are suggesting;

-Increase the processor's voltage a bit (small increments)
-Increase of FSB volts a bit (what do you recommend?)

I red posts about increasing the PCI-E bus speed by a small increment also (for some obscure reasons, to increase stablility...)

So now at stock speed (Orthos), Speed fan 4.29 gives me a Temp1 of 42 Deg.Cel
Temp2 of 27 Deg.Cel

At 2.6Ghz(Orthos) Temp1 of 46 Deg.Cel
Temp2 of 42 Deg.Cel

I know it's nothing to write home about, but I'm going slowly but surely.

Delavan
__________________
i7 4770K @ 4.0GHz / Corsair H100i / MSI Z97A Gaming 6 / 16GB Kingston Hyper X 1.5V 1600 / MSI GTX1070 FE / Samsung 850 Evo 500gb / Corsair Performance Pro 128GB SSD / Intel 520 120GB SSD / WD Black 640 GB storage / XFX 850 watts Black Edition PSU

ROG G53SX laptop: i7 2630QM / 12GB DDR3 / GTX560m 2GB / 750GB 7200rpm (14 000 3Dmarks06)
Reply With Quote