I sent the email off.... let me know if you get it..... I know he refers to the 900 but its basically the same. In the email you'll find a pic and this txt...
To remove the top panel on the Nine hundred you will first have to remove the 2 silver screws near the 200mm fan. The top panel is held on with 6 clips and those 2 screws. The clips are on the inside along the edges of the case. There is a total of 6 clips. Remove the two screws and release the 4 clips and lift the top panel up about an inch. Once you have the top panel raised slightly, bump it towards the front of the enclosure to release the remaining two front clips. Here is a link that may also help you.
__________________
E8400 Dual Core 4.0GHZ/ 2x 8800 GTX KO ACS3 PCI-E 630MHZ 768MB 2.0GHZ SLI'd / Raptor 74GB / Antec 1200 Hundred Gaming Case / Corsair XMS2 TWIN2X2048-6400C4 2GB 2X1GB PC6400 DDR2-800 CL 4-4-4-12
680I SLI LGA775 MOBO / Samsung DVD+RW / Enermax Galaxy 1000 wats PSU / 24" Samsung CinkMaster
Cooling:
Swiftech Dual rad
Swiftech Single rad
Swiftech Micro Res
Swiftech Apogee GT Cpu block
2x Koolance 8800 GTX Full Coverage Water blocks
Feser One Blue Fluid |